Grosmimi Ocean Edition PPSU Straw Cup 200ml/300ml(6M+) Cream Beige 海洋系列

Made In Korea，Hot in the World

FEATURES

1. One-touch type of cap allows easy open/close for baby to use.
2. “+ Cut” straw teat prevents any leakage from the bottle.
3. Using without the tube helps the first time users to get used to the straw cup.
4. The air valve prevents backflow due to differences in temperature and pressure inside and outside the bottle.
5. It can be completely separated for hygienic cleaning, and easy to assembled after cleaning.
6. PPSU, the FDA approved material in USA provides for high heat resistance and durability.

COUNTRY OF ORIGIN: KOREA

MAINTENANCE

Be sure to detach all the parts, and clean/sterilize it before using it. Please follow the proper way of washing on the information page inside in order to wash straw teat correctly. The teat may have silicone smell. When it is too much, wash the teat with gentle cleanser, and let it dry naturally for a day. To prevent damages to the product, use a soft bottle brush. Please follow the way of sterilizing in hot water on next page, and be extra careful of burns. UV sterilizer can be used, but long periods of use may cause discoloration, deformation, or lamp odor. When using the dishwasher, printing may peel off, or it can damage the product due to collision caused by auto-cleaning. (One Touch Cap cannot be used in the dishwasher.) Make sure to clean and dry immediately after use. (If not, the bottle may be stained or smelly.) Be careful of the bottles not to touch the pot directly when sterilizing in hot water, as deformation of the bottle may occur. Not following the instructions of using or cleaning may damage the product, and may not be exchangeble or refundable for this reason.

PRECAUTIONS

Keep away from fire and direct sunlight. The print on the bottle may be erased depending on the environment of use. Be careful not to put any parts accurately before using it. Keep it out of the reach of children and use it with guardian. It can create backflows by the pressure difference if you put cold, hot beverage(above 40ºC), or soda. Do not give a strong impact, such as dropping or bumping. It may cause damage, injury, and leakage of contents. Bubbles, spots, or micro scratches may occur during the molding process, and this is not a defective product. (No exchangeable or returnable)